XM 2040
- Introduction
- Specifications
- Downloads
- Video tutorials
XM Series Miniature Modules are designed to provide the simplest and easiest way for loudspeaker designers to concentrate on what they do best: Loudspeaker designs. With the combination of off-the-shelf amplifiers, the designer can take advantage of our superb DSP technology to overcome the crossover challenges. All complex signal processing is done by the XM. Precise parameters can be fine tuned and matched exactly to the specific requirements of the loudspeakers. Presets can be used to perform comparison tests, or retrieved as different settings for different production models. Noise floor is around -115dB which is consistent with the whole Xilica product line.
Inputs and Outputs
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced
Audio Performance
Freq Response: +/- 0.1dB (20 to 20kHz)
Dynamic Range: 115dB typ (unweighted)
CMMR: > 60dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @+4dBu)
Digital Audio Performance
Processor: 40-bit floating point
Sampling Rate: 96kHz
Analog Converters: High Performance 24-bit
Propogation Delay: 1.5ms
Front Panel Controls
Level Meters: 4 LED
Audio Input:
3-pin XLR
RS-232: Female DB-9
Ethernet: CAT-5 (optional)
Power: Molex 0.156” Connector
General
Power: +/-12V/DC
Dimensions: 5.9”x3.2”x1.3” (150x81x33mm)
Weight: 1 lbs / 0.46 kg
Audio Control Parameters
Gain : -40 to +15dB in 0.25dB steps
Polarity: +/-
Delay: Up to 100ms per I/O
Equalizers (8 per I/O):
Type: Parametric, Hi-shelf, Lo-shelf,
Gain: -30 to +15dB in 0.25dB steps
Bandwidth: 0.02 to 2.50 octaves (Q=0.5 to 72)
Crossover Filters (2 Individuals per Output):
Filter Types: Butterworth, Bessel, Linkwitz Riley
Slopes: 6 to 48dB/oct
Limiters:
Threshold: -20 to +20dBu
Attack: 0.3 to 100ms
Release: 2 to 32X the attack time
System Parameters
Configuration: 2or 3-Way
Note: specifications subject to change without notice
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced
Audio Performance
Freq Response: +/- 0.1dB (20 to 20kHz)
Dynamic Range: 115dB typ (unweighted)
CMMR: > 60dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @+4dBu)
Digital Audio Performance
Processor: 40-bit floating point
Sampling Rate: 96kHz
Analog Converters: High Performance 24-bit
Propogation Delay: 1.5ms
Front Panel Controls
Level Meters: 4 LED
Audio Input:
3-pin XLR
RS-232: Female DB-9
Ethernet: CAT-5 (optional)
Power: Molex 0.156” Connector
General
Power: +/-12V/DC
Dimensions: 5.9”x3.2”x1.3” (150x81x33mm)
Weight: 1 lbs / 0.46 kg
Audio Control Parameters
Gain : -40 to +15dB in 0.25dB steps
Polarity: +/-
Delay: Up to 100ms per I/O
Equalizers (8 per I/O):
Type: Parametric, Hi-shelf, Lo-shelf,
Gain: -30 to +15dB in 0.25dB steps
Bandwidth: 0.02 to 2.50 octaves (Q=0.5 to 72)
Crossover Filters (2 Individuals per Output):
Filter Types: Butterworth, Bessel, Linkwitz Riley
Slopes: 6 to 48dB/oct
Limiters:
Threshold: -20 to +20dBu
Attack: 0.3 to 100ms
Release: 2 to 32X the attack time
System Parameters
Configuration: 2or 3-Way
Note: specifications subject to change without notice
- Manuals
- Specsheet
- Firmware
- Software
Coming soon.